The HVAC systems in our homes keep us cold in the summer and ensure a comforting warmth during winter. But like every other appliance, the HVAC system also encounters quite a few issues over time. In this article, we inform you how to fix common HVAC problems. There are some easy guides to do that job. So let’s go to the report.
Solving HVAC problems as soon as they arise is a must for efficient and hassle-free comfort. Issues such as dirty air filters, thermostat troubles, water leakage, and so on are quite common. And the solutions to these problems are quite simple as well.
For AC repair, Frisco city has some highly experienced technicians working in the neighborhood. And in this guide, we will bring you proper and expert solutions from these HVAC specialists.
5 Common HVAC Problems and How to Solve Them
Solving HVAC problems as soon as you notice them will benefit you in many ways. This includes monetary benefits by improving efficiency and longevity. Take a look at how to fix the most common HVAC problems.
Dirty Air Filters
One of the most frequent problems homeowners encounter with HVAC systems is dirty air filters. Inside the system, air filters keep dirt, debris, dust, and many more from entering the home.
Over time, these filters accumulate these pollutants and impact the efficiency of the cooling and heating system. It will also impact the air quality. To ensure your HVAC system runs efficiently, you must act as soon as you realize that the filters in your A/C system are clogged and restricting the airflow.
Solution
The solution to the issue is simple. Check the air filters on a regular basis and clean them properly. Cleaning the filters will prevent pollutants from entering the house and improve the system’s efficiency as well. However, ensure you rely on professionals to clean the air filters.
Damaged Or Malfunctioning Thermostat
One of the most important HVAC components is the thermostat. The temperature set on the thermostat plays a major role in the performance of the cooling and heating system. If the thermostat does not work properly or stops working, then the HVAC system will not be able to maintain the correct temperature.
Solution
If you notice that the HVAC system of your home is not working perfectly, check whether the thermostat is functioning correctly. Get the thermostat repaired or replace it with a new one. Repairing or replacing a thermostat does not cost much. But make sure you rely on an experienced technician to install the thermostat.
Blown Fuse
Another common issue with heating or cooling systems is a blown fuse. Issues with the circuit breaker will also impact the functionality of the system. If you notice that the HVAC system is not powering properly or turning off without any reason, it could be an issue with the fuse or circuit breaker.
Solution:
Oftentimes, the circuit breaker trips or the fuse blows due to power overload. Find out which fuse or circuit breaker is connected to your HVAC system and change it Since the problem is electrical, take help from an experienced electrician.Â
Water Leakage
As the HVAC system works to keep us cold or warm, and it condensates while operating. This condensation travels through the drain pipes connected to the system to move the water away from your home. However, over time, the accumulation of dirt, debris, dust, etc., blocks the drainage system, resulting in water leakage.
Crack on the drain pipes can also result in this problem. Water leakage can significantly damage your walls and furniture. Working to solve this solution when the HVAC system starts leaking is essential to avoid damage.
Solution
To prevent water leakage, make sure to clean the drain pipes on a regular basis. Clean the tubes with bleach or other cleaning solutions to remove any sort of blockage. Do not forget to check the lines for cracks or tears. Repair the cracks with sealant or tape or replace the pipes if the damage is significant.
Cold and Hot Spots
Last but not least, uneven distribution of airflow is also a problem that homeowners encounter frequently. Oftentimes, you will notice that certain parts of the room are heating or cooling more than usual. These are known as cold and hot spots.
And this can make the environment inside the home uncomfortable. This problem typically arises for a number of reasons, including poor insulation, improper sizing of the HVAC system, and many more.
Solution
Ensure proper insulation of your home. Insulate the attic and block direct sunlight entering through the windows with blinds and curtains. Before choosing and installing an HVAC system, pay attention to the size of your home and select one accordingly.
For air conditioning repair, Frisco, Texas has many experienced HVAC contractors. So, make sure to take their suggestions into account before getting an HVAC system.Â
Frequently Asked Questions – FAQs
Can I DIY repair an HVAC system?
There are several problems that homeowners face with their HVAC systems. While most of these problems require professional help, you can fix a few on your own. For example, you can change fuses, clean drain pipes, or replace thermostat batteries. However, make sure that you have the proper HVAC knowledge before you start your work.
How Much Does HVAC Repair Cost?
The overall pricing of the repair depends on several factors. These factors include the severity of the problem, the size and position of the system, and so on. However, focus on the quality of the work rather than paying attention to the final bill. Typically, AC repair costs range from $50 to $500 or more, depending on the work required.
Summing Up
Over the years, we have become heavily dependent on HVAC systems for comfort, and these issues are quite common. It is essential that you pay attention to these problems as soon as they appear to improve longevity and save money in the long run. If you are searching for experienced technicians for AC repair, Frisco, Texas, is home to several highly skilled contractors and individuals.
