How To Wash A Blender

How To Wash A Blender

If your blender has a removable cup or base, wash it in the dishwasher on the top rack. If your blender doesn’t have a removable cup or base, fill a large bowl with warm water and add 1 tablespoon of vinegar or lemon juice. Put the blender jar into the bowl and turn it on to low speed. Let it run for several minutes, then turn it off and remove the jar. Wipe down the inside of the jar with a damp cloth. To clean the blade, put some mild soap into a small dish and wet the blade lightly. Rubbing will remove any food residue buildup.

Blenders can be a big hassle to clean, but with a little bit of know-how, they can be cleaned quickly and easily. Follow these simple tips to help keep your blender running like new: 

Washing a Blender

Washing a blender is an important step to keeping it running smoothly. Blender manufacturers usually recommend washing the blender every four to six weeks, but it’s always a good idea to check with the manufacturer for specific instructions. There are many detergents available that can use on blenders, so it’s important to find one that is specifically designed for this type of appliance. Follow the manufacturer’s instructions carefully and make sure to rinse the blender thoroughly after using the detergent.

Step 1: Unplug the Blender

Blender owners everywhere should be familiar with the unplugging ritual. It’s always a good idea to unplug your blender before washing it, just to be on the safe side. Blenders can be sensitive to water and soap, so it’s important not to accidentally damage them.

To wash your best blender, start by expanding the sides of the pitcher so that the blades and base are inside. Add enough cold water to cover the ingredients and turn on the blender according to the manufacturer’s instructions. Once it starts up, add soap to the water and continue blending until all of the soap is dissolved. Finish off by pouring out the liquid into a sink or glass jar, and wipe down the outside of the pitcher with a clean cloth. It’s important to note that you should never put your blender in the dishwasher—always unplug it first!

Step 2: Tear Down and Separate Parts

Blender Parts: Tearing Down and Separating Them, If your blender is giving you trouble, it might be time to tear it down and separate its parts. This guide will show you how to do just that. When your blender isn’t blending properly, there’s a good chance one or more of its parts are faulty. In this article, we’ll show you how to identify which part is causing the issue, and how to fix it. Before starting, make sure that all of your components are unplugged and free from debris. You’ll also need a Phillips screwdriver and a bowl for mixing materials (such as water). Start by removing the cover on the front of the blender. There are usually four screws at the base that need to remove to do so.

Step 3: Soak Pieces in Soapy Water

Motor – the part that turns the blender blades. Make sure to disassemble it and give it a good wash with warm soapy water and a detergent. Dry it off completely before putting it back together.

Blade Plates – these are the large, flat surfaces on either side of the motor that chop up food. Again, make sure they’re thoroughly washed in warm soapy water and then dried off completely before reassembly.

Base – this is the main body of the blender, where all of the connections are made between the different pieces. Again, be sure to clean it well with soap and water and then dry it off completely before putting it back together…or you’ll end up with a mess on your hands!

Step 4: Scrub and Rinse the Remaining Parts

After using a blender to make smoothies, soup, or other kitchen concoctions, there is a good chance that it needs to wash. Follow these simple steps to clean the blender and its remaining parts: Scrub the exterior with a brush. Rinse the interior with water and detergent. Let the blender dry completely before storing it away. By following these simple steps, you can keep your blender in top condition for future use!

Step 5: Reassemble and Dry

If your blender is washable, it’s important to follow the manufacturer’s instructions for cleaning. Some appliances require a specific type of detergent or water temperature; otherwise, you could damage the components. If the blender can’t be thoroughly cleaned or needs to repair after being washed. It’s best to take it to a service center. Once it’s dry and all the parts are put back together, test the blender by making a smoothie or soup and checking for leaks.

Washing a blender is a simple task that can help keep it in good condition. Follow these steps to clean your blender: 

Remove the blender jug and base. Fill a sink with warm water and soap. Fit the blender jug into the base and position it so the blade is submerged in the water. Turn on the blender and let it run for about 15 minutes, or until the blades are spinning rapidly and making a lot of noise. Remove the jug from the base and fill it with cold water to stop the blades from spinning. Fit the base back onto the jug and place it in the refrigerator for at least 24 hours, or until you’re ready to use it again.


We recommend that you wash your blender every so often to keep it running smoothly and efficiently. Blenders can a great tool for creating smoothies, soups, and other kitchen staples, but if they’re not kept clean, they can quickly become clogged and less effective. So don’t forget to give your blender a thorough cleaning now and then – it’ll thank you!

Scroll to Top